Ontario HVAC prices, every system on one scale
Typical 2026 installed prices for 15 heating, cooling and hot water systems in Ontario, before 13% HST. Each bar sits on the same dollar scale, so you can see at a glance how a furnace compares with a heat pump, a boiler or a mini-split.
| System | Typical range | Range on a common scale |
|---|---|---|
| Furnaces | ||
| Gas furnace, single-stage95 to 96% AFUE | $4,000 to $6,500 | |
| Gas furnace, two-stage96% AFUE, ECM blower | $5,500 to $8,000 | |
| Gas furnace, modulating97 to 98% AFUE, variable speed | $7,000 to $11,000 | |
| Central air conditioning | ||
| Central AC, standard1.5 to 3 ton, about 14.3 SEER2 | $3,800 to $7,000 | |
| Central AC, high efficiencyvariable speed | $6,500 to $10,500 | |
| Furnace and AC together | ||
| Furnace and central AC togetherreplaced in one job | $8,000 to $15,000 | |
| Heat pumps | ||
| Cold-climate heat pump, ductedwhole home, air source | $9,000 to $18,000 | |
| Dual fuel systemheat pump with gas furnace backup | $11,000 to $20,000 | |
| Ductless mini-splits | ||
| Ductless mini-split, single zoneone indoor head | $3,500 to $6,500 | |
| Ductless mini-split, multi-zone3 to 5 indoor heads | $9,000 to $18,000 | |
| Boilers | ||
| Combi boilerhigh efficiency, heat and hot water | $7,000 to $13,000 | |
| Hydronic heating boilerboiler only | $6,000 to $11,000 | |
| Water heaters | ||
| Tank water heater40 to 50 gal, gas | $1,800 to $3,200 | |
| Tankless water heatergas | $3,500 to $6,000 | |
| Geothermal | ||
| Geothermal heat pumpground source, whole home | $25,000 to $45,000 | to $45,000 |
Heating Cooling Heats and cools Hot water. The tick marks the midpoint of each range.
How to read a price range
Every range here, as in the index on the Ontario Furnace Prices home page, describes the same job: a standard replacement in an existing detached home, with reusable ductwork and venting, before 13% HST. It is the band fair quotes for that job usually fall into, not a promise for yours.
- Low end$4,000
- A like-for-like swap: easy access, venting and ducts reused, an entry model, a quiet month.
- Midpoint$5,250
- A sensible budget figure before anyone has seen your house.
- High end$6,500
- Harder access, more labour, a better model within the tier, or a busy January week.
Extras such as new venting, ductwork changes or a gas line are priced on top of the range, not inside it.
Use the low end to spot a quote that leaves something out, the midpoint to set a budget and the high end to test a quote above it. A quote outside the range is not automatically wrong; ask what is different about your job.
What pushes a quote to the top of the range
The equipment sets the base price. The house sets most of the rest:
- Venting. A new vent run or a chimney liner adds $300 to $1,500.
- Ductwork. Transitions, a bigger return or reworked runs add $500 to $3,000+.
- Electrical. Heat pumps often need a new circuit ($500 to $2,500), sometimes a panel upgrade ($2,000 to $4,500).
- Access. Attics, crawlspaces and finished basements add labour hours.
- Tier. Staged burners, variable-speed equipment and premium lines sit at the top of each band.
- Timing. A January breakdown leaves little room to compare quotes.
Our price methodology explains where the ranges come from.
Turn a range into your price
A free, no-obligation estimate looks at your venting, ductwork and access and gives you a written number for your home.
Free, no obligation. About a minute to request.
Every price guide
-
Furnace pricesSingle-stage from $4,000 to $6,500, two-stage and modulating up to $11,000, plus the extras that move a quote.
$4,000 to $6,500
-
Furnace installation costWhat an installed price includes, the add-ons that move it, special cases like oil-to-gas conversions, and a quote checker.
-
Air conditioner pricesCentral air installed, standard and variable speed, with sizing, coil, line set and timing explained.
$3,800 to $7,000
-
Furnace and AC pricesBoth systems replaced in one job, priced by pairing and compared with buying them separately.
$8,000 to $15,000
-
Heat pump pricesDucted, dual fuel and ductless heat pumps: installed prices, running cost at Ontario rates and how the rebates work.
$9,000 to $18,000
-
Ductless mini-split pricesSingle-zone and multi-zone mini-split prices, what pushes a quote up, and when ductless beats a ducted heat pump.
$3,500 to $6,500
-
Boiler pricesCombi and heating-only boilers for radiator and in-floor homes, plus venting, piping and the water heater left on the chimney.
$7,000 to $13,000
-
Water heater pricesGas tank and tankless prices, the orphaned-chimney problem, gas line upsizing and the rent or buy break-even.
$1,800 to $3,200
-
Geothermal costGround-source heat pump prices, loop types, Ontario drilling rules and the payback arithmetic against gas, oil and electric heat.
$25,000 to $45,000
Get closer to your own number
- Price and size calculatorsEstimate a furnace or heat pump price, size a furnace or AC, compare yearly heating costs.
- Prices by cityLocal price snapshots for 12 Ontario cities, from Windsor to Ottawa.
- Prices by brandEntry, mid and premium tiers for eight furnace brands, plus best-brand guides.
Questions people ask
Are these prices quotes?
No. They are typical 2026 installed ranges, compiled from publicly posted Ontario contractor pricing, list-price guidance and typical installation scopes. Only a written quote after an installer has seen your home is a firm number. See how we estimate prices.
Do the prices include HST?
No. Every range is before 13% HST, which applies to the whole job, equipment and labour. Multiply by 1.13 to compare with a quote that includes tax: a $6,000 job is $6,780 with HST.
Why is the heat pump range so much wider than the furnace range?
A heat pump's price depends on its capacity, its cold-climate rating, whether your panel and ducts can handle it, and whether a furnace stays as backup. A whole-home ducted system runs $9,000 to $18,000. See heat pump prices for the breakdown.
Which heating system is cheapest to install in Ontario?
A single-zone mini-split ($3,500 to $6,500) and a single-stage gas furnace ($4,000 to $6,500) have the lowest entry prices. Cheapest to install is not cheapest to run, so compare yearly costs with the heating cost calculator.
Found your system? Get your number
Once you know the range, a free in-home estimate gives you the written price for your own home.
Free, no obligation. About a minute to request.